dmesg - 2012-11-24 01:39
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-33-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu SMP Thu Oct 18 16:19:45 UTC 2012 (Ubuntu 3.2.0-33.52-generic 3.2.31)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fea0000 (usable)
[ 0.000000] BIOS-e820: 000000007fea0000 - 000000007feac000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007feac000 - 000000007ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard Pavilion dv5000 (EZ533UA#ABA) /30A4, BIOS F.42 06/21/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fea0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-CFFFF uncachable
[ 0.000000] D0000-D5FFF write-back
[ 0.000000] D6000-D6FFF uncachable
[ 0.000000] D7000-DBFFF write-protect
[ 0.000000] DC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7c50] f7c50
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 364f4000 - 37272000
[ 0.000000] ACPI: RSDP 000f7c20 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 7fea4577 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7feabe1a 00074 (v01 HP Piranha 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 7fea45ab 0786F (v01 HP 309B 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7feacfc0 00040
[ 0.000000] ACPI: SSDT 7feabe8e 000F0 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 7feabf7e 00046 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: MCFG 7feabfc4 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fea0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fea0
[ 0.000000] On node 0 totalpages: 523823
[ 0.000000] free_area_init_node: node 0, pgdat c1825580, node_mem_map f54f4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294292 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x11
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77e4000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519729
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8382720 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fea0)
[ 0.000000] Memory: 2045980k/2095744k available (5621k kernel code, 49312k reserved, 2769k data, 712k init, 1186440k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1832000 - 0xc18e4000 ( 712 kB)
[ 0.000000] .data : 0xc157d644 - 0xc1831c80 (2769 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157d644 (5621 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f4808000 soft=f480a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1989.750 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.50 BogoMIPS (lpj=7959000)
[ 0.008011] pid_max: default: 32768 minimum: 301
[ 0.008044] Security Framework initialized
[ 0.008078] AppArmor: AppArmor initialized
[ 0.008081] Yama: becoming mindful.
[ 0.008161] Mount-cache hash table entries: 512
[ 0.008341] Initializing cgroup subsys cpuacct
[ 0.008349] Initializing cgroup subsys memory
[ 0.008360] Initializing cgroup subsys devices
[ 0.008363] Initializing cgroup subsys freezer
[ 0.008367] Initializing cgroup subsys blkio
[ 0.008377] Initializing cgroup subsys perf_event
[ 0.008407] mce: CPU supports 5 MCE banks
[ 0.012191] SMP alternatives: switching to UP code
[ 0.020417] Freeing SMP alternatives: 24k freed
[ 0.020433] ACPI: Core revision 20110623
[ 0.024022] ftrace: allocating 25915 entries in 51 pages
[ 0.028117] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028543] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.071722] CPU0: AMD Turion(tm) 64 Mobile Technology ML-37 stepping 02
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 48
[ 0.072003] ... generic registers: 4
[ 0.072003] ... value mask: 0000ffffffffffff
[ 0.072003] ... max period: 00007fffffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000000000f
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Brought up 1 CPUs
[ 0.072003] Total of 1 processors activated (3979.50 BogoMIPS).
[ 0.072003] devtmpfs: initialized
[ 0.072003] EVM: security.selinux
[ 0.072003] EVM: security.SMACK64
[ 0.072003] EVM: security.capability
[ 0.072003] PM: Registering ACPI NVS region at 7feac000 (344064 bytes)
[ 0.072003] print_constraints: dummy:
[ 0.072003] RTC time: 17:55:30, date: 11/23/12
[ 0.072003] NET: Registered protocol family 16
[ 0.072003] EISA bus registered
[ 0.072003] node 0 link 0: io port [1000, fffff]
[ 0.072003] TOM: 0000000080000000 aka 2048M
[ 0.072003] node 0 link 0: mmio [a0000, bffff]
[ 0.072003] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.072003] node 0 link 0: mmio [e0000000, efffffff]
[ 0.072003] node 0 link 0: mmio [80000000, dfffffff]
[ 0.072003] bus: [00, ff] on node 0 link 0
[ 0.072003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.072003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.072003] bus: 00 index 2 [mem 0x80000000-0xffffffff]
[ 0.072003] ACPI: bus type pci registered
[ 0.072003] PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
[ 0.072003] PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
[ 0.072003] PCI: Using MMCONFIG for extended config space
[ 0.072003] PCI: Using configuration type 1 for base access
[ 0.072569] bio: create slab at 0
[ 0.072664] ACPI: Added _OSI(Module Device)
[ 0.072667] ACPI: Added _OSI(Processor Device)
[ 0.072669] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072671] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.073367] ACPI: EC: Look up EC in DSDT
[ 0.075160] ACPI: Interpreter enabled
[ 0.075169] ACPI: (supports S0 S3 S4 S5)
[ 0.075186] ACPI: Using IOAPIC for interrupt routing
[ 0.140527] ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
[ 0.140628] ACPI: No dock devices found.
[ 0.140630] HEST: Table not found.
[ 0.140635] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.141225] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.142394] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.142399] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000ddfff] (ignored)
[ 0.142403] pci_root PNP0A03:00: host bridge window [mem 0x000de000-0x000dffff] (ignored)
[ 0.142407] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.142410] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.142414] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.142425] pci 0000:00:00.0: [1002:5950] type 0 class 0x000600
[ 0.142457] pci 0000:00:01.0: [1002:5a3f] type 1 class 0x000604
[ 0.142502] pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604
[ 0.142540] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.142545] pci 0000:00:05.0: PME# disabled
[ 0.142588] pci 0000:00:13.0: [1002:4374] type 0 class 0x000c03
[ 0.142613] pci 0000:00:13.0: reg 10: [mem 0xc0000000-0xc0000fff]
[ 0.142742] pci 0000:00:13.1: [1002:4375] type 0 class 0x000c03
[ 0.142766] pci 0000:00:13.1: reg 10: [mem 0xc0001000-0xc0001fff]
[ 0.142899] pci 0000:00:13.2: [1002:4373] type 0 class 0x000c03
[ 0.142926] pci 0000:00:13.2: reg 10: [mem 0xc0002000-0xc0002fff]
[ 0.143047] pci 0000:00:13.2: supports D1 D2
[ 0.143050] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.143056] pci 0000:00:13.2: PME# disabled
[ 0.143092] pci 0000:00:14.0: [1002:4372] type 0 class 0x000c05
[ 0.143114] pci 0000:00:14.0: reg 10: [io 0x8400-0x840f]
[ 0.143128] pci 0000:00:14.0: reg 14: [mem 0xc0003000-0xc00033ff]
[ 0.143188] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.143245] pci 0000:00:14.1: [1002:4376] type 0 class 0x000101
[ 0.143269] pci 0000:00:14.1: reg 10: [io 0x8430-0x8437]
[ 0.143282] pci 0000:00:14.1: reg 14: [io 0x8424-0x8427]
[ 0.143296] pci 0000:00:14.1: reg 18: [io 0x8428-0x842f]
[ 0.143310] pci 0000:00:14.1: reg 1c: [io 0x8420-0x8423]
[ 0.143324] pci 0000:00:14.1: reg 20: [io 0x8410-0x841f]
[ 0.143406] pci 0000:00:14.3: [1002:4377] type 0 class 0x000601
[ 0.143513] pci 0000:00:14.4: [1002:4371] type 1 class 0x000604
[ 0.143579] pci 0000:00:14.5: [1002:4370] type 0 class 0x000401
[ 0.143603] pci 0000:00:14.5: reg 10: [mem 0xc0003400-0xc00034ff]
[ 0.143730] pci 0000:00:14.6: [1002:4378] type 0 class 0x000703
[ 0.143754] pci 0000:00:14.6: reg 10: [mem 0xc0003800-0xc00038ff]
[ 0.143878] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.143902] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.143921] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.143940] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.143967] PCI: peer root bus 00 res updated from pci conf
[ 0.143994] pci 0000:01:05.0: [1002:5955] type 0 class 0x000300
[ 0.144012] pci 0000:01:05.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
[ 0.144018] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.144024] pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff]
[ 0.144039] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.144052] pci 0000:01:05.0: supports D1 D2
[ 0.144069] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.144074] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.144078] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.144082] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.144110] pci 0000:00:05.0: PCI bridge to [bus 02-03]
[ 0.144145] pci 0000:06:02.0: [14e4:4318] type 0 class 0x000280
[ 0.144168] pci 0000:06:02.0: reg 10: [mem 0xc0204000-0xc0205fff]
[ 0.144288] pci 0000:06:04.0: [104c:8031] type 2 class 0x000607
[ 0.144318] pci 0000:06:04.0: reg 10: [mem 0xc0208000-0xc0208fff]
[ 0.144367] pci 0000:06:04.0: supports D1 D2
[ 0.144370] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.144377] pci 0000:06:04.0: PME# disabled
[ 0.144408] pci 0000:06:04.2: [104c:8032] type 0 class 0x000c00
[ 0.144438] pci 0000:06:04.2: reg 10: [mem 0xc0209000-0xc02097ff]
[ 0.144455] pci 0000:06:04.2: reg 14: [mem 0xc0200000-0xc0203fff]
[ 0.144577] pci 0000:06:04.2: supports D1 D2
[ 0.144580] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.144586] pci 0000:06:04.2: PME# disabled
[ 0.144615] pci 0000:06:04.3: [104c:8033] type 0 class 0x000180
[ 0.144644] pci 0000:06:04.3: reg 10: [mem 0xc0206000-0xc0207fff]
[ 0.144773] pci 0000:06:04.3: supports D1 D2
[ 0.144776] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.144783] pci 0000:06:04.3: PME# disabled
[ 0.144810] pci 0000:06:04.4: [104c:8034] type 0 class 0x000805
[ 0.144840] pci 0000:06:04.4: reg 10: [mem 0xc020a000-0xc020a0ff]
[ 0.144857] pci 0000:06:04.4: reg 14: [mem 0xc0209c00-0xc0209cff]
[ 0.144873] pci 0000:06:04.4: reg 18: [mem 0xc0209800-0xc02098ff]
[ 0.144976] pci 0000:06:04.4: supports D1 D2
[ 0.144979] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.144985] pci 0000:06:04.4: PME# disabled
[ 0.145022] pci 0000:06:06.0: [10ec:8139] type 0 class 0x000200
[ 0.145052] pci 0000:06:06.0: reg 10: [io 0xa000-0xa0ff]
[ 0.145068] pci 0000:06:06.0: reg 14: [mem 0xc020a400-0xc020a4ff]
[ 0.145184] pci 0000:06:06.0: supports D1 D2
[ 0.145187] pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.145193] pci 0000:06:06.0: PME# disabled
[ 0.145255] pci 0000:00:14.4: PCI bridge to [bus 06-08] (subtractive decode)
[ 0.145265] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.145271] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.145278] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.145281] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.145285] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.145358] pci_bus 0000:00: on NUMA node 0
[ 0.145362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.145422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.145481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.145536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.145584] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.145588] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.145591] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.147579] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 0.147626] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 0.147671] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 0.147717] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 0.147762] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 0.147808] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 0.147853] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 0.147899] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 0.148028] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.148033] vgaarb: loaded
[ 0.148035] vgaarb: bridge control possible 0000:01:05.0
[ 0.148191] i2c-core: driver [aat2870] using legacy suspend method
[ 0.148193] i2c-core: driver [aat2870] using legacy resume method
[ 0.148289] SCSI subsystem initialized
[ 0.148340] libata version 3.00 loaded.
[ 0.148399] usbcore: registered new interface driver usbfs
[ 0.148414] usbcore: registered new interface driver hub
[ 0.148446] usbcore: registered new device driver usb
[ 0.148552] PCI: Using ACPI for IRQ routing
[ 0.148668] PCI: pci_cache_line_size set to 64 bytes
[ 0.148765] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.148768] reserve RAM buffer: 000000007fea0000 - 000000007fffffff
[ 0.148890] NetLabel: Initializing
[ 0.148893] NetLabel: domain hash size = 128
[ 0.148894] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.148908] NetLabel: unlabeled traffic allowed by default
[ 0.158162] AppArmor: AppArmor Filesystem Enabled
[ 0.158210] pnp: PnP ACPI init
[ 0.158237] ACPI: bus type pnp registered
[ 0.158892] pnp 00:00: [bus 00-ff]
[ 0.158895] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.158898] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[ 0.158901] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[ 0.158904] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[ 0.158907] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[ 0.158910] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[ 0.158913] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[ 0.158916] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[ 0.158919] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[ 0.158922] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[ 0.158925] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[ 0.158928] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[ 0.158931] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[ 0.158934] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[ 0.158937] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[ 0.158940] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[ 0.158943] pnp 00:00: [mem 0x000de000-0x000dffff window]
[ 0.158946] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[ 0.158948] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[ 0.158951] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[ 0.158954] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[ 0.158957] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[ 0.158960] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[ 0.158963] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[ 0.158966] pnp 00:00: [mem 0x000ee000-0x000effff window]
[ 0.158969] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.158973] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.158975] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.158978] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.159033] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.159055] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.159058] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.159060] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.159131] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.159135] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.159138] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.159142] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159351] pnp 00:02: [io 0x0000-0x001f]
[ 0.159354] pnp 00:02: [io 0x0080-0x008f]
[ 0.159357] pnp 00:02: [io 0x00c0-0x00df]
[ 0.159360] pnp 00:02: [dma 4]
[ 0.159392] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.159402] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.159418] pnp 00:03: [irq 13]
[ 0.159454] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.159465] pnp 00:04: [io 0x0070-0x0071]
[ 0.159470] pnp 00:04: [irq 8]
[ 0.159502] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.159510] pnp 00:05: [io 0x0061]
[ 0.159541] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.159553] pnp 00:06: [io 0x0060]
[ 0.159555] pnp 00:06: [io 0x0064]
[ 0.159560] pnp 00:06: [irq 1]
[ 0.159603] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.159615] pnp 00:07: [irq 12]
[ 0.159656] pnp 00:07: Plug and Play ACPI device, IDs SYN0120 SYN0100 SYN0002 PNP0f13 (active)
[ 0.159672] pnp 00:08: [io 0x0072-0x0073]
[ 0.159674] pnp 00:08: [io 0x1080]
[ 0.159677] pnp 00:08: [io 0x00b0-0x00b1]
[ 0.159679] pnp 00:08: [io 0x0092]
[ 0.159682] pnp 00:08: [io 0x040b]
[ 0.159684] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.159687] pnp 00:08: [io 0x04d6]
[ 0.159689] pnp 00:08: [io 0x0870-0x087f]
[ 0.159692] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.159694] pnp 00:08: [io 0x0c14]
[ 0.159697] pnp 00:08: [io 0x0c50-0x0c52]
[ 0.159699] pnp 00:08: [io 0x0c6c]
[ 0.159709] pnp 00:08: [io 0x0c6f]
[ 0.159711] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.159714] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.159716] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.159719] pnp 00:08: [io 0x8000-0x805f]
[ 0.159722] pnp 00:08: [io 0x8100-0x81ff window]
[ 0.159724] pnp 00:08: [io 0x0f40-0x0f47]
[ 0.159727] pnp 00:08: [io 0x0280-0x0293]
[ 0.159790] system 00:08: [io 0x1080] has been reserved
[ 0.159794] system 00:08: [io 0x040b] has been reserved
[ 0.159797] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.159800] system 00:08: [io 0x04d6] has been reserved
[ 0.159803] system 00:08: [io 0x0870-0x087f] has been reserved
[ 0.159807] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.159810] system 00:08: [io 0x0c14] has been reserved
[ 0.159813] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 0.159816] system 00:08: [io 0x0c6c] has been reserved
[ 0.159819] system 00:08: [io 0x0c6f] has been reserved
[ 0.159823] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.159826] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.159829] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.159833] system 00:08: [io 0x8000-0x805f] has been reserved
[ 0.159836] system 00:08: [io 0x8100-0x81ff window] has been reserved
[ 0.159840] system 00:08: [io 0x0f40-0x0f47] has been reserved
[ 0.159843] system 00:08: [io 0x0280-0x0293] has been reserved
[ 0.159847] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.159898] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.159901] pnp 00:09: [mem 0xfff80000-0xffffffff]
[ 0.159904] pnp 00:09: [mem 0x00000000-0x00000fff]
[ 0.159919] pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.159963] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.159967] system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.159971] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.184039] pnp: PnP ACPI: found 10 devices
[ 0.184041] ACPI: ACPI bus type pnp unregistered
[ 0.184045] PnPBIOS: Disabled by ACPI PNP
[ 0.220709] Switching to clocksource acpi_pm
[ 0.220732] PCI: max bus depth: 2 pci_try_num: 3
[ 0.220757] pci 0000:00:14.4: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.220762] pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
[ 0.220766] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.220769] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.220774] pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
[ 0.220778] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.220783] pci 0000:00:05.0: PCI bridge to [bus 02-03]
[ 0.220792] pci 0000:06:04.0: BAR 16: assigned [mem 0x84000000-0x87ffffff]
[ 0.220795] pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.220799] pci 0000:06:04.0: BAR 14: assigned [io 0xa400-0xa4ff]
[ 0.220802] pci 0000:06:04.0: BAR 13: assigned [io 0xa800-0xa8ff]
[ 0.220806] pci 0000:06:04.0: CardBus bridge to [bus 07-07]
[ 0.220809] pci 0000:06:04.0: bridge window [io 0xa800-0xa8ff]
[ 0.220815] pci 0000:06:04.0: bridge window [io 0xa400-0xa4ff]
[ 0.220822] pci 0000:06:04.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.220829] pci 0000:06:04.0: bridge window [mem 0x84000000-0x87ffffff]
[ 0.220836] pci 0000:00:14.4: PCI bridge to [bus 06-08]
[ 0.220840] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.220848] pci 0000:00:14.4: bridge window [mem 0xc0200000-0xc02fffff]
[ 0.220854] pci 0000:00:14.4: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.220871] pci 0000:00:05.0: setting latency timer to 64
[ 0.220895] pci 0000:06:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.220903] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.220906] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.220909] pci_bus 0000:00: resource 6 [mem 0x80000000-0xffffffff]
[ 0.220912] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.220915] pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
[ 0.220918] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.220922] pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
[ 0.220925] pci_bus 0000:06: resource 1 [mem 0xc0200000-0xc02fffff]
[ 0.220928] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.220931] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.220934] pci_bus 0000:06: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.220937] pci_bus 0000:06: resource 6 [mem 0x80000000-0xffffffff]
[ 0.220940] pci_bus 0000:07: resource 0 [io 0xa800-0xa8ff]
[ 0.220943] pci_bus 0000:07: resource 1 [io 0xa400-0xa4ff]
[ 0.220946] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.220949] pci_bus 0000:07: resource 3 [mem 0x84000000-0x87ffffff]
[ 0.220999] NET: Registered protocol family 2
[ 0.221070] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.221402] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.222350] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.222905] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.222908] TCP reno registered
[ 0.222912] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.222937] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.223052] NET: Registered protocol family 1
[ 0.223067] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.223073] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.223098] pci 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.276049] pci 0000:00:13.0: PCI INT A disabled
[ 0.276059] pci 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.332034] pci 0000:00:13.1: PCI INT A disabled
[ 0.332046] pci 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.332066] pci 0000:00:13.2: PCI INT A disabled
[ 0.332096] pci 0000:01:05.0: Boot video device
[ 0.332120] PCI: CLS 32 bytes, default 64
[ 0.332537] audit: initializing netlink socket (disabled)
[ 0.332549] type=2000 audit(1353693330.328:1): initialized
[ 0.357922] Trying to unpack rootfs image as initramfs...
[ 0.388262] highmem bounce pool size: 64 pages
[ 0.388270] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.396251] VFS: Disk quotas dquot_6.5.2
[ 0.396342] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.397031] fuse init (API version 7.17)
[ 0.397139] msgmni has been set to 1678
[ 0.408316] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.408350] io scheduler noop registered
[ 0.408352] io scheduler deadline registered
[ 0.408361] io scheduler cfq registered (default)
[ 0.408567] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.408598] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.410346] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.412256] ACPI: AC Adapter [ACAD] (on-line)
[ 0.412335] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.412366] ACPI: Lid Switch [LID]
[ 0.412424] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.412430] ACPI: Power Button [PWRB]
[ 0.412485] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.412488] ACPI: Power Button [PWRF]
[ 0.412546] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
[ 0.412549] ACPI: Sleep Button [SLPF]
[ 0.412605] Marking TSC unstable due to TSC halts in idle
[ 0.412616] ACPI: acpi_idle registered with cpuidle
[ 0.446454] ACPI: Invalid active0 threshold
[ 0.448278] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.448281] ACPI: Thermal Zone [THRM] (0 C)
[ 0.448323] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.448338] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.448366] ERST: Table is not found!
[ 0.448367] GHES: HEST is not enabled!
[ 0.449921] serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.449963] serial 0000:00:14.6: PCI INT B disabled
[ 0.450119] Linux agpgart interface v0.103
[ 0.457010] brd: module loaded
[ 0.457976] loop: module loaded
[ 0.458250] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.458307] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 0.458798] Fixed MDIO Bus: probed
[ 0.458825] tun: Universal TUN/TAP device driver, 1.6
[ 0.458827] tun: (C) 1999-2004 Max Krasnyansky
[ 0.458875] PPP generic driver version 2.4.2
[ 0.458990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.459005] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.459027] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.459074] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
[ 0.459146] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
[ 0.459175] isapnp: Scanning for PnP cards...
[ 0.508389] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.508530] hub 1-0:1.0: USB hub found
[ 0.508535] hub 1-0:1.0: 8 ports detected
[ 0.508640] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.508652] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.508665] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.508711] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.508730] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
[ 0.508751] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.572357] hub 2-0:1.0: USB hub found
[ 0.572369] hub 2-0:1.0: 4 ports detected
[ 0.572458] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.572485] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.572533] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.572561] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
[ 0.656151] hub 3-0:1.0: USB hub found
[ 0.656163] hub 3-0:1.0: 4 ports detected
[ 0.656252] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.656337] usbcore: registered new interface driver libusual
[ 0.656394] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.675063] i8042: Detected active multiplexing controller, rev 1.1
[ 0.768760] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.768772] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.768775] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.768779] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.768782] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.769102] mousedev: PS/2 mouse device common for all mice
[ 0.773660] rtc_cmos 00:04: RTC can wake from S4
[ 0.773792] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.773822] rtc0: alarms up to one month, 114 bytes nvram
[ 0.773928] device-mapper: uevent: version 1.0.3
[ 0.774010] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.774060] EISA: Probing bus 0 at eisa.0
[ 0.774063] EISA: Cannot allocate resource for mainboard
[ 0.774066] Cannot allocate resource for EISA slot 1
[ 0.774069] Cannot allocate resource for EISA slot 2
[ 0.774071] Cannot allocate resource for EISA slot 3
[ 0.774073] Cannot allocate resource for EISA slot 4
[ 0.774076] Cannot allocate resource for EISA slot 5
[ 0.774078] Cannot allocate resource for EISA slot 6
[ 0.774081] Cannot allocate resource for EISA slot 7
[ 0.774083] Cannot allocate resource for EISA slot 8
[ 0.774085] EISA: Detected 0 cards.
[ 0.774099] cpufreq-nforce2: No nForce2 chipset.
[ 0.774146] cpuidle: using governor ladder
[ 0.774221] cpuidle: using governor menu
[ 0.774224] EFI Variables Facility v0.08 2004-May-17
[ 0.774492] TCP cubic registered
[ 0.774649] NET: Registered protocol family 10
[ 0.775268] NET: Registered protocol family 17
[ 0.775273] Registering the dns_resolver key type
[ 0.775297] Using IPI No-Shortcut mode
[ 0.775400] PM: Hibernation image not present or could not be loaded.
[ 0.775417] registered taskstats version 1
[ 0.909685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.007946] isapnp: No Plug & Play device found
[ 1.151874] Freeing initrd memory: 13816k freed
[ 1.173757] Magic number: 4:454:947
[ 1.173830] tty tty4: hash matches
[ 1.173908] rtc_cmos 00:04: setting system clock to 2012-11-23 17:55:31 UTC (1353693331)
[ 1.173913] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-37 (1 cpu cores) (version 2.20.00)
[ 1.177709] powernow-k8: fid 0xc (2000 MHz), vid 0x4
[ 1.177712] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[ 1.177714] powernow-k8: fid 0x8 (1600 MHz), vid 0x8
[ 1.177716] powernow-k8: fid 0x0 (800 MHz), vid 0x16
[ 1.177751] powernow-k8: ph2 null fid transition 0xc
[ 1.177781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.177784] EDD information not available.
[ 1.177906] Freeing unused kernel memory: 712k freed
[ 1.178467] Write protecting the kernel text: 5624k
[ 1.178505] Write protecting the kernel read-only data: 2324k
[ 1.196772] udevd[80]: starting version 175
[ 1.366010] b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.373549] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.381727] scsi0 : pata_atiixp
[ 1.383620] sdhci: Secure Digital Host Controller Interface driver
[ 1.383624] sdhci: Copyright(c) Pierre Ossman
[ 1.385051] scsi1 : pata_atiixp
[ 1.385816] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
[ 1.385819] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
[ 1.396114] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 1.396126] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 1.396135] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 1.396145] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 1.436133] ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
[ 1.436156] 8139cp 0000:06:06.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.436192] sdhci-pci 0000:06:04.4: SDHCI controller found [104c:8034] (rev 0)
[ 1.436211] sdhci-pci 0000:06:04.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.436269] mmc0: no vmmc regulator found
[ 1.436303] Registered led device: mmc0::
[ 1.437371] mmc0: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 1.437395] mmc1: no vmmc regulator found
[ 1.437431] Registered led device: mmc1::
[ 1.438468] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 1.438489] mmc2: no vmmc regulator found
[ 1.438515] Registered led device: mmc2::
[ 1.439914] mmc2: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 1.549284] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
[ 1.549381] ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA72A, max UDMA/100
[ 1.549384] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.564542] ata2.00: configured for MWDMA2
[ 1.565406] ata1.00: configured for UDMA/100
[ 1.565546] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
[ 1.565822] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.565975] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.566021] sd 0:0:0:0: [sda] Write Protect is off
[ 1.566024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.566045] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.570402] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
[ 1.575638] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.575642] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.575929] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.576149] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.602462] sda: sda1 sda2 < sda5 >
[ 1.602849] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.603440] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.603496] 8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.605830] 8139too 0000:06:06.0: eth0: RealTek RTL8139 at 0xa000, 00:16:d4:39:0d:dd, IRQ 22
[ 1.605864] firewire_ohci 0000:06:04.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 1.663176] firewire_ohci: Added fw-ohci device 0000:06:04.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.096365] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.096370] EXT4-fs (sda1): write access will be enabled during recovery
[ 2.160126] firewire_core: created device fw0: GUID 673f02009516427d, S400
[ 3.062400] EXT4-fs (sda1): recovery complete
[ 3.083142] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 27.842246] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.875815] udevd[299]: starting version 175
[ 27.948745] lp: driver loaded but no devices found
[ 28.003754] Adding 522236k swap on /dev/sda5. Priority:-1 extents:1 across:522236k
[ 28.027218] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.096499] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 28.123141] wmi: Mapper loaded
[ 28.264613] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/LNXVIDEO:00/input/input5
[ 28.264707] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 28.282894] [drm] Initialized drm 1.1.0 20060810
[ 28.418706] yenta_cardbus 0000:06:04.0: CardBus bridge found [103c:30a4]
[ 28.418733] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions
[ 28.418740] yenta_cardbus 0000:06:04.0: Using INTVAL to route CSC interrupts to PCI
[ 28.418743] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to ISA
[ 28.418751] yenta_cardbus 0000:06:04.0: TI: mfunc 0x00a61b22, devctl 0x64
[ 28.497535] [drm] radeon defaulting to kernel modesetting.
[ 28.497539] [drm] radeon kernel modesetting enabled.
[ 28.497632] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 28.497637] radeon 0000:01:05.0: power state changed by ACPI to D0
[ 28.497648] radeon 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 28.525927] cfg80211: Calling CRDA to update world regulatory domain
[ 28.526074] [drm] initializing kernel modesetting (RS480 0x1002:0x5955 0x103C:0x30A4).
[ 28.526098] [drm] register mmio base: 0xC0100000
[ 28.526100] [drm] register mmio size: 65536
[ 28.526282] [drm] Generation 2 PCI interface, using max accessible memory
[ 28.526289] radeon 0000:01:05.0: VRAM: 128M 0x0000000080000000 - 0x0000000087FFFFFF (128M used)
[ 28.526293] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 28.526304] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 28.526306] [drm] Driver supports precise vblank timestamp query.
[ 28.526331] [drm] radeon: irq initialized.
[ 28.536311] [drm] Detected VRAM RAM=128M, BAR=128M
[ 28.536315] [drm] RAM width 128bits DDR
[ 28.539310] [TTM] Zone kernel: Available graphics memory: 437046 kiB.
[ 28.539314] [TTM] Zone highmem: Available graphics memory: 1030266 kiB.
[ 28.539316] [TTM] Initializing pool allocator.
[ 28.539348] [drm] radeon: 128M of VRAM memory ready
[ 28.539355] [drm] radeon: 512M of GTT memory ready.
[ 28.539376] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 28.570399] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 28.575601] [drm] PCIE GART of 512M enabled (table at 0x0000000032180000).
[ 28.643136] radeon 0000:01:05.0: WB enabled
[ 28.645115] [drm] Loading R300 Microcode
[ 28.648953] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 28.648960] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[ 28.648969] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 28.648973] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa4ff 0xa800-0xa8ff
[ 28.696995] type=1400 audit(1353693359.018:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=557 comm="apparmor_parser"
[ 28.697517] type=1400 audit(1353693359.018:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=557 comm="apparmor_parser"
[ 28.697815] type=1400 audit(1353693359.018:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=557 comm="apparmor_parser"
[ 28.822270]
[ 28.822278] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff]
[ 28.822283] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff: excluding 0xc0200000-0xc020ffff
[ 28.822297] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 28.822301] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 28.946572] [drm] radeon: ring at 0x00000000A0001000
[ 28.946594] [drm] ring test succeeded in 2 usecs
[ 28.946727] [drm] radeon: ib pool ready.
[ 28.946807] [drm] ib test succeeded in 0 usecs
[ 28.947262] [drm] Radeon Display Connectors
[ 28.947265] [drm] Connector 0:
[ 28.947266] [drm] VGA
[ 28.947269] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 28.947271] [drm] Encoders:
[ 28.947273] [drm] CRT1: INTERNAL_DAC2
[ 28.947275] [drm] Connector 1:
[ 28.947276] [drm] S-video
[ 28.947277] [drm] Encoders:
[ 28.947279] [drm] TV1: INTERNAL_DAC2
[ 28.947294] [drm] radeon: power management initialized
[ 29.054314] [drm] fb mappable at 0xC8040000
[ 29.054318] [drm] vram apper at 0xC8000000
[ 29.054320] [drm] size 3145728
[ 29.054322] [drm] fb depth is 24
[ 29.054324] [drm] pitch is 4096
[ 29.054572] fbcon: radeondrmfb (fb0) is primary device
[ 29.055642] Console: switching to colour frame buffer device 128x48
[ 29.055675] fb0: radeondrmfb frame buffer device
[ 29.055677] drm: registered panic notifier
[ 29.055687] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 29.149445] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 29.190471] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 29.216225] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216231] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216234] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216238] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216241] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216245] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216247] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216251] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216254] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216257] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216260] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216263] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216266] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216270] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216273] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216276] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216279] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216282] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216285] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216289] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216291] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216295] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[ 29.216298] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216301] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 29.216304] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216308] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 29.216310] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 29.216314] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[ 29.259531] snd_atiixp_modem 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 29.308134] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
[ 29.392018] MC'97 0 converters and GPIO not ready (0x1)
[ 29.423073] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 29.430590] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 29.486913] snd_atiixp 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 29.520647] udevd[325]: renamed network interface eth0 to eth3
[ 29.606813] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606823] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606827] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606829] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606833] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606836] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606839] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606842] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606848] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606851] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606854] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606858] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606860] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606864] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606866] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606870] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606873] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606879] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606882] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606885] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606888] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.606891] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606895] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.606897] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 29.606901] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.606905] cfg80211: World regulatory domain updated:
[ 29.606907] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 29.606910] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606913] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.606916] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 29.606919] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.606922] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 29.619831] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 29.620532] Registered led device: b43-phy0::radio
[ 29.620551] Broadcom 43xx driver loaded [ Features: PNL ]
[ 29.634056] udevd[325]: renamed network interface wlan0 to wlan1
[ 29.642630] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x280-0x297 0x370-0x377
[ 29.650142] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7
[ 29.651113] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x870-0x87f
[ 29.651884] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 29.660715] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[ 29.660744] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 29.660771] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 29.660819] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 30.007754] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 30.150182] init: failsafe main process (745) killed by TERM signal
[ 30.199875] ppdev: user-space parallel port driver
[ 30.215253] Bluetooth: Core ver 2.16
[ 30.215277] NET: Registered protocol family 31
[ 30.215280] Bluetooth: HCI device and connection manager initialized
[ 30.215284] Bluetooth: HCI socket layer initialized
[ 30.215286] Bluetooth: L2CAP socket layer initialized
[ 30.215293] Bluetooth: SCO socket layer initialized
[ 30.231101] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.231106] Bluetooth: BNEP filters: protocol multicast
[ 30.321291] Bluetooth: RFCOMM TTY layer initialized
[ 30.321298] Bluetooth: RFCOMM socket layer initialized
[ 30.321301] Bluetooth: RFCOMM ver 1.11
[ 30.339279] type=1400 audit(1353693360.658:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=808 comm="apparmor_parser"
[ 30.344686] type=1400 audit(1353693360.666:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=808 comm="apparmor_parser"
[ 30.448995] type=1400 audit(1353693360.770:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=846 comm="apparmor_parser"
[ 30.454849] type=1400 audit(1353693360.774:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=847 comm="apparmor_parser"
[ 30.455402] type=1400 audit(1353693360.774:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=847 comm="apparmor_parser"
[ 30.455703] type=1400 audit(1353693360.774:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=847 comm="apparmor_parser"
[ 30.473452] type=1400 audit(1353693360.794:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=848 comm="apparmor_parser"
[ 30.687273] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 30.687279] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[ 30.687283] b43-phy0 ERROR: You must go to and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 30.687510] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 30.689506] 8139too 0000:06:06.0: eth3: link down
[ 30.691088] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 30.692831] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 30.830928] init: alsa-restore main process (915) terminated with status 99
[ 31.541528] init: plymouth-stop pre-start process (1122) terminated with status 1
[ 54.836473] 8139too 0000:06:06.0: eth3: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 54.836687] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 64.960037] eth3: no IPv6 routers present